Page 1 of 1

Reset Supra pickup height to default factory settings

Posted: 08 Nov 2019 05:52
by perca

Hi - I recently became the happy owner of a 10y old Excalibur Supra :) The previous owner has done significant changes to the pickup heights and I want to reset it to the pickup setup which was used originally. Can someone help me find the default  spacing between the pickups and the strings (top/bottom) for this HSH combination? Do you measure with open strings? Hope someone can help. Thanks in advance  :)


Reset Supra pickup height to default factory settings

Posted: 08 Nov 2019 13:23
by yuri1973

CHECK THIS OUT:

http://www.vigier.fr/forum/message.php?id_question=5677

 


Reset Supra pickup height to default factory settings

Posted: 08 Nov 2019 15:06
by perca

Awesome - thanks for the fast response!


Re: Reset Supra pickup height to default factory settings

Posted: 06 Mar 2022 16:17
by jaguar
Hi, digging up an old thread as the link doesn't work.
Would anyone know the default factory settings for the bridge pickup in a GV Wood? 

Re: Reset Supra pickup height to default factory settings

Posted: 07 Mar 2022 11:52
by yuri1973
Found this table....

Modèle Position : Grave Centre Aigu
Floyd Mi 1 0,5 1 mm au dessus de la plaque Au plus près vibrato tiré
  Mi 6 2,5 1 mm au dessus de la plaque 3,5
S/SP Mi 1 1,2 1 mm au dessus de la plaque Au plus près vibrato tiré
  Mi 6 4 1 mm au dessus de la plaque Micro horizontal
SL Mi 1 1 1 mm au dessus de la plaque Au plus près
  Mi 6 4 1 mm au dessus de la plaque Micro horizontal
SF/SPF Mi 1 1 1 mm au dessus de la plaque Au plus près
  Mi 6 4 1 mm au dessus de la plaque Micro horizontal
VEX Mi 1 0,7 1 mm au dessus de la plaque Au plus près vibrato tiré
  Mi 6 3 1 mm au dessus de la plaque Micro horizontal
VM6 Mi1 2,5   1,5
  Mi 6 5   2,5
GVM Mi 1 1,5   1
  Mi 6 4   1,5
GVW,R Mi 1 1   0,5
  Mi 6 4   1,5
U, VE7 Mi 1 1 4 mm Au plus près vibrato tiré
  Mi 6 2,5 Idem Idem
BFoot Mi 1 0,5   0,5
  Mi 6 2,5   Idem
Basses sol 2,5   1,5
  Mi 3,5   2,5

Re: Reset Supra pickup height to default factory settings

Posted: 07 Mar 2022 23:39
by jaguar
Great, thanks for sharing!
I would read it as follows.

GV Wood, or Rock:
Neck pickup: 1 on high E string; 4 on low E string.
Bridge pickup: 0,5 on high E string; 1,5 on low E string.

Although, I don't know if I'm reading it well...
Would those be millimeters between the humbucker and the string ?
Would it be while fretting at the top fret? 

I wonder as 0,5mm would seem very, very close. Even if it's the high E, pretty much touching the string. 

Re: Reset Supra pickup height to default factory settings

Posted: 14 Mar 2022 17:28
by 1Patrice Vigier
Press the string on the last fret and measure top pole piece to bottom of string