Vigier Guitars

VigierDJ

Hey! There's no real benefit to a plek on our instruments. If you need a refret, I can sell you a set of frets and any reputable luthier should be able to replace them for you. Email me at dj@vigierguitars.com and I'll get you sorted!

VigierDJ

Next size is 10-52 you have the info in the FAQ here so you need the nut with 2 dots Emma site is not accurate, the nut 11-52 does not exist... Thank you. I'm in the US. Where would I order the nut with 2 dots? For online ordering, if that's what turns out to be best, what is it actually called? I ...

VigierDJ

If you haven't already (got a lot of emails recently about Shawn Lanes) feel free to email me directly and I'll be happy to help you get your hands on a Shawn Lane! dj@vigierguitars.com
- DJ

VigierDJ

Hey there! First, there isn't a huge difference in range when pushing down... you can get the classic "strings go slack" effect on either one. When it comes to pulling up, the 2011 type trem has about a step and a half of pull out of the factory. We pitch them forward slightly, which looks a little ...

VigierDJ

Hey guys, I wish we had a dealer in the Chicago area, too! Believe me! Until we get one though, all our US dealers ship for free within the US although I can't tell you on an individual basis what the return policies are for each one. I welcome any and all suggestions for new dealers in the Midwest ...

VigierDJ

djsaysauce wrote:

Soooo, if I got one, it would not fit my Vigier Retro Expert? Not without drilling out the body?

Correct.

VigierDJ

<r><QUOTE author="djsaysauce"><s>[quote="djsaysauce"]</s> Hi, you said Neutrik locking jacks, any chance you could give me the actual part number so I can order one? <e>[/quote]</e></QUOTE> <span style...

VigierDJ

<r><QUOTE author="djsaysauce"><s>[quote="djsaysauce"]</s> I already replaced my switchcraft jack in my Viger Expert, but it is wobbly again, and the signal is reduced or cutting out. Is there a way to just re-tighten it, or do I have to replace it again? <e>[/quote]</e></QUOTE> ...

VigierDJ

If you want to get really fancy about it, you can actually instally a more typical 1/4" jack in the existing hole by using a forstner bit to tunnel out where the jack is now. I did that to my basses for tou and it's very clean and the jacks never fail. Hope that helps!

VigierDJ

<r><QUOTE author="niquekay"><s>[quote="niquekay"]</s> <QUOTE author="niquekay"><s>[quote="niquekay"]</s> They are very cheap and easy to replace (stick on/peel off). Contact a dealer or distributor in your country to or...

VigierDJ

<r>We use super switches in pretty much everything to allow for maximum flexibility and also to wire the single coil positions in a way to reduce as much 60 cycle hum as possible. So, the previous owner may have been inclined to monkey with it to see what options they had available. Swapping the ...

VigierDJ

I second Ben. Give your preferred strings a try before you swap out the nut. They're so soft, they're pretty forgiving. The stock nut is cut 9-46, so usually 10-46 is gravy in there, but if you feel like it's pinching you can swap them out for whatever you need!

VigierDJ

<r>I use one of these: <a target="_blank" href="https://www.stewmac.com/Luthier_Tools/Tools_by_Job/Tools_for_Electronics_and_Pickups/Jack_The_Gripper.html">https://www.stewmac.com/Luthier_Tools/Tools_by_Job/Tools_for_Electronics_and_Pickups/Jack_The_Gripper.html </a> It's ...

VigierDJ

<r>Did you buy the guitar new or used? Generally the SLs sound pretty warm and thick (because of the pickups and also partly because of the shorter scale.) We do use an unconventional wiring scheme on all the HSH guitars, I'm wondering if a previous owner may have swapped the switch a...

VigierDJ

<r><QUOTE author="Football"><s>[quote="Football"]</s> Curious if it is typical/expected when after bending say a G string, that the tuning of that string goes flat until the tremolo bar is used again. To basically depress the tremolo quickly to reset the tuning. I know for man...

VigierDJ

I'll have to check with the boss, but I'm not sure the Ambers have the plate mentioned. DiMarzio affixes a little plate to their existing pickups to allow for the three screw mounting. Sometimes you can just take it off and stick it on the new pickup. It's pretty tiny.

VigierDJ

<r>Sorry for the delay jumping in here... With our pickup rings and pickguard alike, usually the best option is to pop a hole in the side that needs one. We use three screws to mount the pickups so you can pitch it forward and back. If you want to replace them, usually you'll need to ...

VigierDJ

I spoke with Patrice. Turns out we do have just three of these pickguard available. Please email me - dj@vigierguitars.com and we'll take care of you.

VigierDJ

<r>Your distributor should be able to help you. They are ultimately responsible for these kinds of things. The biggest hurdle is whether or not we have the pickguard in stock. If we do, great. If not, you'll need to wait, which can be a drag. Since we don't currently offer the Special i...

VigierDJ

<r>Yeah you can definitely swap the pickups... The routing is obviously different from the Special, but in all practicality it would be pretty much the same guitar. I wuould keep picks in the battery compartment, but that's just me. If you wanted to add extra electronic components, yo...

VigierDJ

<r><QUOTE author="Speedy1"><s>[quote="Speedy1"]</s> Hi, just as the thread title asks- can I get stainless frets and a maple fretboard on the Shawn Lane model? If so, how much is the upcharge? <e>[/quote]</e></QUOTE> Unfortunately maple is not an option. I believe we&ap...

VigierDJ

Hey! The routing on the HSS guitars is actually not the same as the same model HSH unfortunately. So as-is, you would only be able to fit single coil sized pickups in the neck position.

VigierDJ

We have two trems available. Both have a ton of room in either direction. For me personally, the 2011 is all you could possibly need. Some players like the extra room and sense of security of our Floyd style trem.

VigierDJ

Those are nickel frets! We started stainless after 2010/2011. And the pickups should be the exact same DiMarzios we use now.

VigierDJ

<r>The necks don't actually have much "built-in" relief. It's more that they're built to within a specific tolerance. The action should be ridiculously low out of the box. I know some players will adjust their bridges to get it a hair lower. Without touching the strings, what is th...

Vigier Guitars

Search found 101 matches

Re: Re fret

Re: Questions about the 2014 Expert Retro 54 hardtail I just bought

Re: Last order?

Re: Floyd vs Vigier Trem Range, Tuning Compensation

Re: Any Vigier owners in/around Chicago?

Excalibur output jack

Excalibur output jack

Excalibur output jack

Excalibur output jack

Material above nut to dampen sound of strings

Shawn Lane Signature - Thin Sounding?

Shawn Lane Master Nut / Gauge

Excalibur output jack

Shawn Lane Signature - Thin Sounding?

Adjusting Overall Tremolo Height on a 2011 style Expert Classic Rock

GV Wood pickup ring options wanted, pickup change??

GV Wood pickup ring options wanted, pickup change??

NEW PICKGUARD - PLEASE HELP ME !!!!!

NEW PICKGUARD - PLEASE HELP ME !!!!!

Excalibur ultra

Can I get a maple fretboard and stainless frets on a Shawn Lane Excalibur Signature model?

2014 HSS Excal Custom

Vigier Bidges

Older Excalibur Special specs

Neck Relief Trouble on Shawn Lane Master